Hi, > Jul 12 17:30:36.218: %PM-4-ERR_DISABLE: channel-misconfig error detected on > Gi1/0/1, putting Gi1/0/1 in err-disable state
so...what is the cause of this. check the config of gi1/0/1, ensure it matches the methods/speed etc of other members of the port-channel etc its been assigned to > The port is in err-disable regularly .. a shut and no shut that's restart err-disable doing its job > there is a solution to disable the errdisable on this type of switch? huh???? its currently likely saving your a** from something far worse happening on your network. alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
