Hi, i'm trying to pass REP through a MPLS network. the two PE are me3600. The configuration:
Me 3600 PE1: interface GigabitEthernet0/xx switchport trunk allowed vlan none switchport mode trunk mtu 9216 service instance 100 ethernet encapsulation dot1q 1-4094 rewrite ingress tag push dot1q 100 symmetric l2protocol forward service-policy input ratelimit_200Mb xconnect xxx.xxx.xxx.xxx 100 encapsulation mpls Me 3600 PE2: interface GigabitEthernet0/yy switchport trunk allowed vlan none switchport mode trunk mtu 9216 service instance 100 ethernet encapsulation dot1q 1-4094 rewrite ingress tag push dot1q 100 symmetric l2protocol forward service-policy input ratelimit_200Mb xconnect yyy.yyy.yyy.yyy 100 encapsulation mpls I have no success the REP between CE´s not working, I tried with "l2protocol tunnel" but the problem persists... The ios image used is "me360x-universal-mz.154-3.S2.bin" Can see anything about this online, does anyone have this issue? Best Regards _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
