I don't have a ME3600 that in ME3800 I have used the following configuration , which applies only xconnect to the whole interface, and can pass all frames inside the EoMPLS tunnel
Me 3600 PE1: interface GigabitEthernet0/xx no switchport mtu 9216 no ip address service-policy input ratelimit_200Mb xconnect xxx.xxx.xxx.xxx 100 encapsulation mpls Me 3600 PE2: interface GigabitEthernet0/yy no switchport mtu 9216 no ip address service-policy input ratelimit_200Mb xconnect yyy.yyy.yyy.yyy 100 encapsulation mpls _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
