The solution works very well, the only problem is that I have to dedicate all interface for one client, but in this particular situation there is no problem...
I appreciate very much the help provided from Dimitris Befas and them from Michalis Bersimis -----Mensagem original----- De: cisco-nsp [mailto:[email protected]] Em nome de [email protected] Enviada: quinta-feira, 11 de janeiro de 2018 13:28 Para: [email protected] Assunto: Re: [c-nsp] Resilient Ethernet Protocol (REP) I don't have a ME3600 that in ME3800 I have used the following configuration , which applies only xconnect to the whole interface, and can pass all frames inside the EoMPLS tunnel Me 3600 PE1: interface GigabitEthernet0/xx no switchport mtu 9216 no ip address service-policy input ratelimit_200Mb xconnect xxx.xxx.xxx.xxx 100 encapsulation mpls Me 3600 PE2: interface GigabitEthernet0/yy no switchport mtu 9216 no ip address service-policy input ratelimit_200Mb xconnect yyy.yyy.yyy.yyy 100 encapsulation mpls _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
