Actually you have to be able to transport the following frames: 1. LSL (hellos) (untagged frames towards multicast mac 01:80:c2:00:00:00) 2. HFL (link failures etc) (REP admin vlan (un)tagged towards multicast mac 01:00:0c:cc:cc:ce)
The proposed configuration of Michalis works fine if you can dedicate the whole interface. On Jan 11, 2018 15:28, <[email protected]> wrote: > I don't have a ME3600 that in ME3800 I have used the following > configuration , which applies only xconnect to the whole interface, and can > pass all frames inside the EoMPLS tunnel > > > Me 3600 PE1: > interface GigabitEthernet0/xx > no switchport > mtu 9216 > no ip address > service-policy input ratelimit_200Mb > xconnect xxx.xxx.xxx.xxx 100 encapsulation mpls > > Me 3600 PE2: > interface GigabitEthernet0/yy > no switchport > mtu 9216 > no ip address > service-policy input ratelimit_200Mb > xconnect yyy.yyy.yyy.yyy 100 encapsulation mpls > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
