We have like eight 9900s in the network, and only 1 guy uses phone control thru Jabber... easier to just assign the groups and walk away...
J On Wed, Dec 24, 2014 at 3:02 AM, Erick Bergquist <[email protected]> wrote: > What I did was create a new role group called Jabber that has all > those CTI roles in the Jabber group, then once that is made you just > assign the Jabber role group to users. > > On Tue, Dec 23, 2014 at 8:32 PM, Jonathan Charles <[email protected]> > wrote: > > Tested with Webex Connect, works too... > > > > On Tue, Dec 23, 2014 at 8:25 PM, Jonathan Charles <[email protected]> > wrote: > >> > >> Yep, that totally did it... > >> > >> Added: > >> > >> Standard CTI Allow Control of Phones supporting Connected Xfer and conf > >> Standard CTI Allow Control of Phones supporting Rollover Mode > >> > >> And it worked on Jabber... still need to test it on the Webex Connect > >> thing that is still floating around... > >> > >> > >> Jonathan > >> > >> On Tue, Dec 23, 2014 at 7:39 PM, Ryan Ratliff (rratliff) > >> <[email protected]> wrote: > >>> > >>> There are additional roles ("allow CTi control of phones that...") > users > >>> need to control 9971s via CTI. For 9971s and their close relatives > (8961, > >>> 9951) I believe it's join across lines. > >>> > >>> Sent from my iPhone > >>> > >>> On Dec 23, 2014, at 8:07 PM, Josh Warcop <[email protected]> wrote: > >>> > >>> Not sure initially but WebEx connect is being retired so unlikely > you'll > >>> find much support there. > >>> > >>> The CTI control is almost the same so it is odd it is working for 79xx > >>> and not a 99xx. > >>> > >>> The phone shows up in the phone control list in Jabber when you're > >>> selecting the mode? > >>> > >>> Sent from my Windows Phone > >>> ________________________________ > >>> From: Jonathan Charles > >>> Sent: 12/23/2014 7:58 PM > >>> To: [email protected] > >>> Subject: [cisco-voip] Jabber/Webex Connect phone control of 9971 > >>> > >>> We have users who use Webex Connect (and Jabber) and they can use phone > >>> control for their 7900s et al; but not for the 9971, it just times out > when > >>> you select them. > >>> > >>> We have CUCM 10.5 and the latest version of Jabber/Webex Connect... > >>> problem is exhibited on both Jabber and Webex Connect for the 9971. > >>> > >>> What is different about the 9971 that would cause it to fail? > >>> > >>> > >>> > >>> Jonathan > >>> > >>> _______________________________________________ > >>> cisco-voip mailing list > >>> [email protected] > >>> https://puck.nether.net/mailman/listinfo/cisco-voip > >> > >> > > > > > > _______________________________________________ > > cisco-voip mailing list > > [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-voip > > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
