Experiencing some strange off-hook delay when dialing.
Here are the tests I did:
When dialing an exact match (another DN) from the off-hook position, I get a
full T302 delay before the digits are sent. If however, I mark the target DN as
urgent priority, it routes immediately (as I would expect).
I've done some additional testing and placed 2 single DNs in a new PT/CSS and I
get the same off-hook delay. If I dial the digits and send EnBloc with the dial
softkey, everything works fine.
When trying to transfer a connected call to a third caller, the secondary
transfer button and the target line description do not appear until the delay
passes and the phone rings
I've used DNA and it isn't showing me anything unexpected; save this was a
perfectly working system a few days ago.
I've tried a cluster reboot, and that didn't change the condition. It sounds
like signaling delay except for the fact the I can override the issue with
Urgent Priority, if it were signaling delay nothing would override it. So I am
left with inter-digit timeout but can't see where it could be coming from,
especially with a new PT/CSS that only has 2 DNs in it.
Thanks,
Ryan
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
