DNA won't show the overlapping pattern. Set the Digit Analysis Complexity CallManager Service Parameter to "TranslationAndAlternatePatternAnalysis" on each node then pull CallManager traces for a test call. The Digit Analysis section in the traces will now show the overlapping pattern.
On Wed, Jun 10, 2015 at 8:48 AM, Ryan Huff <[email protected]> wrote: > Experiencing some strange off-hook delay when dialing. > > Here are the tests I did: > > When dialing an exact match (another DN) from the off-hook position, I get > a full T302 delay before the digits are sent. If however, I mark the target > DN as urgent priority, it routes immediately (as I would expect). > > I've done some additional testing and placed 2 single DNs in a new PT/CSS > and I get the same off-hook delay. If I dial the digits and send EnBloc > with the dial softkey, everything works fine. > > When trying to transfer a connected call to a third caller, the secondary > transfer button and the target line description do not appear until the > delay passes and the phone rings > > I've used DNA and it isn't showing me anything unexpected; save this was a > perfectly working system a few days ago. > > I've tried a cluster reboot, and that didn't change the condition. It > sounds like signaling delay except for the fact the I can override the > issue with Urgent Priority, if it were signaling delay nothing would > override it. So I am left with inter-digit timeout but can't see where it > could be coming from, especially with a new PT/CSS that only has 2 DNs in > it. > > Thanks, > > Ryan > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
