Thanks Mr. Meade, didn't think of that one! -Ryan
Date: Wed, 10 Jun 2015 10:50:30 -0400 Subject: Re: [cisco-voip] Interesting off hook dial delay From: [email protected] To: [email protected] CC: [email protected] DNA won't show the overlapping pattern. Set the Digit Analysis Complexity CallManager Service Parameter to "TranslationAndAlternatePatternAnalysis" on each node then pull CallManager traces for a test call. The Digit Analysis section in the traces will now show the overlapping pattern. On Wed, Jun 10, 2015 at 8:48 AM, Ryan Huff <[email protected]> wrote: Experiencing some strange off-hook delay when dialing. Here are the tests I did: When dialing an exact match (another DN) from the off-hook position, I get a full T302 delay before the digits are sent. If however, I mark the target DN as urgent priority, it routes immediately (as I would expect). I've done some additional testing and placed 2 single DNs in a new PT/CSS and I get the same off-hook delay. If I dial the digits and send EnBloc with the dial softkey, everything works fine. When trying to transfer a connected call to a third caller, the secondary transfer button and the target line description do not appear until the delay passes and the phone rings I've used DNA and it isn't showing me anything unexpected; save this was a perfectly working system a few days ago. I've tried a cluster reboot, and that didn't change the condition. It sounds like signaling delay except for the fact the I can override the issue with Urgent Priority, if it were signaling delay nothing would override it. So I am left with inter-digit timeout but can't see where it could be coming from, especially with a new PT/CSS that only has 2 DNs in it. Thanks, Ryan _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
