hi,
I am facing two issues with DX80.
1. First, video call is not successful with DX80. when i check self view
(while not on call).there is nothing. so i think there can be issue with the
camera. video call is enabled on Device > Phone and between video and phone
device pool, the codec is G711, maximum session bit rate for video calls:
384kbps, maximum session bit rate for immersive video calls: 1024kbps
2. Second, is the upgrade (may be upgrade will resolve camera issue) .
Currently DX80 is on android firmware and the required firmware is also
android. I use ftp/sftp to upload the file on both cucm, on one cucm tftp
service is active while on another cucm (sub), tftp is not active but i
uploaded file on both of them and can see the .load file on tftp file
management. but see the following status after upgrade (upgrade failed).
Registration: Registered with Cisco Unified Communications Manager CUCM02
IPv4 Address: x.x.x.x<http://10.163.167.14/>
Active Load ID: sipdx80.10-2-2-23
Inactive Load ID: INVALID
Download Status: Failed
Requested Load ID: sipdx80.10-2-4-99
Download Server: 10.163.72.100
Inactive Load Failure Reason File Not Found
Any suggestions.
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
