Larry Letterman wrote: >Not necessarily...you can also use point-point frame >With sub-interfaces... > > >Larry Letterman >Cisco Systems > You must subinterface for p-p frame. The physical frame encapsulated interface is multipoint.
Yes I know you can use the "frame-relay interface dlci x" command on the physical interface though that doesn't make it right:) Dave > > > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of >Raj Singh >Sent: Thursday, September 04, 2003 9:00 PM >To: [EMAIL PROTECTED] >Subject: RE: Stuck on Subinterfaces - HELP! [7:74854] > > >Use the frame relay for subinterfaces. You use subinterfaces to connect >multiple frame relay location to the hub. > >Raj >**Please support GroupStudy by purchasing from the GroupStudy Store: >http://shop.groupstudy.com FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >**Please support GroupStudy by purchasing from the GroupStudy Store: >http://shop.groupstudy.com >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > > > -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74902&t=74854 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
