Are you sure the touchpad was detected and the drivers loaded? This would need to be the case before X started up, otherwise it would never work (or so I would assume).
Also, are you sure you're using the right config file? I know that with X there are two possible config files now - the XF86Config, and the XF86Config-4. The correct one depends on your distro/config settings. Hope this helps, and that I'm not too far off the mark. Shawn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Peter Pankonin Sent: Tuesday, May 25, 2004 1:57 AM To: CLUG General Subject: Re: [clug-talk] XFree86 Autodetection On Saturday 22 May 2004 08:32 pm, Shawn wrote: > II'd imagine the same would work with Knoppix. You would think that should be the case. However... Last week I tried to get both my touchpad and USB mouse working in Mandrake 9.2. They work fine in Knoppix-STD and so I thought I would copy and paste the Knoppix XF86Config-4 file over my Mandrake XF86Config-4 file. X started fine, but still no touchpad. There must be some other config files in the mix somewhere. -- Peter Pankonin, digitalcrucible There are 10 kinds of people in the world, those who understand binary, and those who don't. _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
