Joel,
Not sure which organizer you have. On some organizers the fastener is the
axle. On others, the fastener goes through a bushing that is attached to the
bottom plate of the organizer. The sheave rides on the bushing. Best thing is
to remove all the fasteners and the top plate and look at the way it's made.
Then you can free the sheave and lubricate it.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: Joel Aronson <[email protected]>
>To: "[email protected]" <[email protected]>
>Sent: Saturday, September 15, 2012 8:02 PM
>Subject: Stus-List deck organizer sheaves
>
>My boat has 3 sheave deck organizers. One of the center sheaves is
>frozen. I hit it with PB Blaster and loosened the screw. I was able
>to slide a putty knife under it top and bottom but it is still frozen.
>Can I just remove the screw completely and give it a whack to
>dislodge it so I can clean it up?
>
>Joel
>Sent from my iPad
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>[email protected]
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
