I put one of those in this year and the bilge has never been so dry for the last twelve years. The sump was always filled with water since the typical float switch was always mounted too high.
Chris Price C&C35 MkI Pradel ----- Original Message ----- From: "Sam Salter" <[email protected]> To: [email protected] Sent: Sunday, December 2, 2012 7:23:06 PM Subject: Re: Stus-List 35/3 bilge pump Joel, I bought one of these (I haven't fitted it yet) it has a built in electronic float switch and will fit between my keel bolts. http://www.defender.com/product.jsp?path=-1%7C51%7C299222%7C84462%7C316440&id=1579952 If anyone else has one working I'd be interested if it was an OK choice! sam :-) C&C 26 Liquorice Ghost Lake Alberta On 2012-12-02, at 4:32 PM, Joel Aronson <[email protected]> wrote: > The bilge pump on my 35/3 is under the forward dinette seat. A hose > leads to a strainer in the forward sump just behind the mast. I'd > like to replace it with a higher volume pump, but I can't find one > that will fit in the bilge compartment next to the keel bolt without > spending ridiculous amounts of money. Any recommendations? > > Joel > 35/3 > The Office > Annapolis > Sent from my iPad > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
