I’ll use my radio and ask for a tow
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew Burton via CnC-List Sent: Thursday, August 28, 2014 1:10 PM To: Marek Dziedzic; cnc-list@cnc-list.com Subject: Re: Stus-List Engine Sound Insulation - Go Without an engine? (save that one time when my outboard quit when turning into the fairway) Which is exactly why I advocate practicing sailing in! We lose these skills over time, so practice is necessary and far from irresponsible. Nothing says we have to come charging in at hull speed. Try approaching with just the jib or just the main up--it's part of getting to know your boat. It sure beats waiting for SeaTow as your boat drifts down an grounds on the jetty. And in a man overboard situation, I absolutely would prefer to use the engine. Unless it was too rough, or as very often happens in the kefuffle of a man overboard, a line wraps around the prop. That's the reason we ALWAYS practice MOB retreival under sail. On Thu, Aug 28, 2014 at 12:39 PM, Marek Dziedzic via CnC-List <cnc-list@cnc-list.com> wrote: Just to make sure, I am far from advocating using sails to enter marinas. I think that in most cases this would be just irresponsible. And I use the engine every time coming in (save that one time when my outboard quit when turning into the fairway) or going out and when anchoring etc. And I bet that most of us would prefer to use the engine in a MOB situation than do it under sails alone. The harbours got more crowded, the slips narrower, the skills required did not get better and the engines did. Not to mention that we very often sail shorthanded. This does not take away from the fact that not that long ago even bigger vessels operated without the auxiliary power and somehow managed to do that. Marek From: dwight via CnC-List <mailto:cnc-list@cnc-list.com> Sent: Thursday, August 28, 2014 9:57 AM To: 'Russ <mailto:russ...@telus.net> & Melody' ; cnc-list@cnc-list.com Subject: Re: Stus-List Engine Sound Insulation - Go Without an engine? Guess I am missing something here…maybe I don’t understand what is meant by “marina”. I know it is possible to dock a 35 footer like Alianna at a “marina” using sails only and I have done it a time or two but under unfavorable wind conditions due to direction or strength in such close quarters I prefer to use auxiliary power and have my sails down and packed away before going to the dock or maybe I am missing what auxiliary power means to anyone in craft not outfitted with sails…or maybe I have just become more of a whimp and less of a purest as I grew older…hell I even prefer auxiliary power when tieing up to a mooring in a crowded mooring field and sailing off a mooring in a crowded field in some wind conditions can also be tricky and unnecessarily risky Dwight Veinot C&C 35MKII, Alianna Head of St. Margaret's Bay, NS _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: August 28, 2014 1:47 AM To: Marek Dziedzic; cnc-list@cnc-list.com Subject: Re: Stus-List Engine Sound Insulation - Go Without an engine? In my olden days as a member of the Yacht Club's Executive Committee, business was brought forth to propose that sailboats must use engines in the marina (or something to that effect). I pointed out that engines are auxiliary power on sailboats and if we are to endorse this business I will push that ALL vessels operating in the marina are required to use auxiliary power. That was the end of discussion. Good times. Cheers, Russ Sweet 35-1 At 07:42 PM 27/08/2014, you wrote: In the olden days, when I was getting my skippers certificate, we had to do all the manoeuvres, including getting in and out of the slip, without the use of the engine (and then again using it). But that art is gone. Now, if I tried to dock under sail there would be a crowd with pitchforks awaiting me on the dock (possibly with some boiling tar and a few (Canada) gees on the side). Marek From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Aaron Rouhi via CnC-List Sent: Wednesday, August 27, 2014 7:33 PM To: Jerome Tauber; cnc-list@cnc-list.com Subject: Re: Stus-List Engine Sound Insulation - Go Without? Under the watchful and at times frightened eyes of my neighbors, I have been routinely sailing into the slip without turning on the good 2QM. Phase II: Learn how to get out of the slip under sail... Cheers, Aaron R. 1979 30-MK1 Annapolis, MD On Aug 27, 2014, at 4:09 PM, "Jerome Tauber via CnC-List" <cnc-list@cnc-list.com> wrote: I thought C&C owners only use their engines to get in and out of docks. Jerry. C&C 27v J&J Sent from my iPhone On Aug 27, 2014, at 3:00 PM, David via CnC-List <cnc-list@cnc-list.com> wrote: Curious...is all the effort worth it? David F. Risch 1981 40-2 (401) 419-4650 <tel:%28401%29%20419-4650> (cell) _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4716 / Virus Database: 4007/8076 - Release Date: 08/21/14 _____ _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
