Tim

I am curious about why you advocate taking the impeller out. Won't antifreeze drain out of your engine when you take the cover off the water pump?

Respectfully

david

C&C 32 Wanderer

On 2016-10-13 12:07 PM, Tim Sippel via CnC-List wrote:

In Water :

Change oil

Check Coolant / change if necessary

Out of water

Run anti-freeze though engine (capture and dispose of properly) I’m not brave enough to simply drain it !

Remove impeller and store with engine key

*Tim Sippel*

**

*C&C 33mk ii Matico*

**

**

**

**

**

**

**

**

*:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Dave S via CnC-List
*Sent:* Monday, October 10, 2016 8:36 PM
*To:* C&c Stus List <cnc-list@cnc-list.com>
*Cc:* Dave S <syerd...@gmail.com>
*Subject:* Re: Stus-List WInterizing 2GM20F

Hi Doug,

Third GTA winter coming up and I have not yet run the red stuff through windstar's engine. (IIRC the manual does not mention doing this) What I have done is drain the water lock muffler and raw water strainer, remove the hoses to the water pump, then drain the block through the two valves on the engine block. (access under the galley sink) Blow any water out though the water pump hose.

Not sure whether that's optimal or not....

Anyway, If I were to use the red stuff, (and I may) I would drain everything first so I could be sure that the antifreeze was not too diluted.

It really is a good time to look in on the water pump impeller..

I would also check the specific gravity of the coolant to ensure its freeze point is low enough. You can get a tester at Crappy tire for this for less than $10.

Top up the batteries with distilled water.

Dave (we met on pier 7 - whitby)

Message: 2
Date: Mon, 10 Oct 2016 20:34:55 +0000 (UTC)
From: <doug.we...@rogers.com <mailto:doug.we...@rogers.com>>
To: C&C List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>>
Subject: Stus-List WInterizing 2GM20F
Message-ID: <1911996305.1436982.1476131695...@mail.yahoo.com <mailto:1911996305.1436982.1476131695...@mail.yahoo.com>>
Content-Type: text/plain; charset="utf-8"

It's my first year with the 2GM20F and it's almost time to winterize it. Is there anything I need to do other running anti freeze through the fresh water intake until it comes out the exhaust??
Cheers,Doug
Celtic Knot33-2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20161010/7d385f04/attachment-0001.html>





------------------------------------------------------------------------
This communication is confidential. We only send and receive email on the basis of the terms set out at www.rogers.com/web/content/emailnotice <http://www.rogers.com/web/content/emailnotice>



Ce message est confidentiel. Notre transmission et réception de courriels se fait strictement suivant les modalités énoncées dans l’avis publié à www.rogers.com/aviscourriel <http://www.rogers.com/aviscourriel%0A>
------------------------------------------------------------------------


_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to