Since everyone was expecting me to reply to this one anyway— I’m also very happy with Warpspeed. :-)
If you are going to race your boat, you’re going to want the best no-stretch stuff out there. If you’re a cruiser, you’re going to be happy with much less expensive line like StaSet or StaSetX. Best wishes for a joyous holiday season along with a happy and healthy (and breezy) new year. Edd ----------------------------------- Edd M. Schillay Captain of the Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, New York www.StarshipSailing.com ----------------------------------- 914.774.9767 | Mobile ----------------------------------- Sent via iPhone 7 iPhone. iTypos. iApologize On Dec 10, 2017, at 11:27 AM, Josh Muckley via CnC-List <cnc-list@cnc-list.com> wrote: Consider the PS article in the link below. I've been very happy with Yale Crystaline and Sampson Warpspeed. https://drive.google.com/folderview?id=0B8pEh5lnvP1ySGpOTUdGRW9xdzQ Also consider the excerpt (source unknown) below: I was taught (by an English race crew) that Mainsail controls are always green, jib sails blue and spinnakers red. Halyards are solid colors and sheets, outhauls etc. flecked or with tracers. (By following this convention, crews are able to move from boat-to-boat without having to be re-educated.) Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD > On Dec 10, 2017 6:08 AM, "T power via CnC-List" <cnc-list@cnc-list.com> wrote: > Hi Everyone, > > I'm looking to replace my foresail and headsail halyard on my C&C 30 MKI, my > foresail is a combination of wire and rope. The boat is used by new sailor > for cruising. > Any help would be greatly appreciated. > > Cheers > > Tom Power > Invictus > C&C 30 MK1 > Fredericton, NB > > _______________________________________________ >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray