Do you mean the goo was not sticky or that there was none? Joe
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts via CnC-List Sent: Friday, May 08, 2020 1:34 AM To: 1 CnC List <cnc-list@cnc-list.com> Cc: Jim Watts <paradigmat...@gmail.com> Subject: [EXTERNAL] Re: Stus-List Need to replace forward hatch on 35 mkIII Once I had the screws out, the hatch frames just lifted off. They were not held on *at all* by goo. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Tue, 5 May 2020 at 19:28, Graham Collins via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hi Matt They do come in a version openable from the outside, scroll down and look at "double opening". Getting a hatch rim off the deck is no biggie, unless someone used 5200 putting it on. With the butyl tape that was used on C&Cs it is pretty easy - remove all screws, and start at a corner where you can get some prying action on it, see if you can lift it at all, get a putty knife in. Work your way up from there. Might take an hour but no heroic measures are needed. Graham Collins Secret Plans C&C 35-III #11 On 2020-05-05 12:30 a.m., Matthew Schlanger via CnC-List wrote: I was liking the idea of Lewmar. And I think the low profiles look great but I don’t see access from top side which the fore-deck guys likes to have to get spinnakers in and out easily without having to go below. When you say easy drop in on Lewmars, I assume I would need to rip out and replace the frame that attaches to the deck. I was thinking of trying to just change out the hatch first. A friend told me of his troubles trying to get the frame off the deck. If it’s a direct replacement the hinges would match? I don’t think I can do that with a Lewmar based on the diagrams I saw. My issue is the hatch itself, I suspect no water is coming in from the bottom frame. I have a couple of emails into Atkins and Hoyle though I have not heard back yet. I’ll keep on them. Again thanks to all. The collective wisdom is amazing. M On Apr 28, 2020, at 2:19 PM, Jim Watts via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I replaced all the hatches on the boat with Lewmars. Saloon hatch and forward hatch were drop-in replacements, the head hatch took a bit of glass work but works fine. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Mon, 27 Apr 2020 at 06:15, Paul Fountain via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Our 77 C&C27-3 had an Aitkens&Hoyle hatch, much better than the Bomar hatches on our 85 33-ll, which have been replaced with Lewmar Ocean series hatches. The angle of the forward hatch made the low profile hatches impractical, and the raised Fiberglas either side made them unattractive. I’d rate the A&H and Lewmar Ocean series comparable . Paul ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Bill Coleman via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Monday, April 27, 2020 8:33:21 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Bill Coleman <colt...@gmail.com<mailto:colt...@gmail.com>> Subject: Re: Stus-List Need to replace forward hatch on 35 mkIII That is a handsome looking hatch. How do you compare the overall quality compared to Atkins & Hoyle or Lewmar? Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of Graham Collins via CnC-List Sent: Sunday, April 26, 2020 9:27 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Graham Collins Subject: Re: Stus-List Need to replace forward hatch on 35 mkIII Hi Matthew Atkins & Hoyle make the direct replacement, but there is an alternative - I put on a low profile stainless hatch from these guys. http://www.manshipmarine.com/low-profile-deck-hatch.html <https://protect2.fireeye.com/v1/url?k=ef24f272-b3b2a3d7-ef24db05-0cc47adc5e34-0410f5840911308c&q=1&e=d779094d-06d4-45c2-9fac-f96401794fa1&u=http%3A%2F%2Fwww.manshipmarine.com%2Flow-profile-deck-hatch.html> I'll look to see if I have any pics. Graham Collins Secret Plans C&C 35-III #11 On 2020-04-26 10:12 p.m., Matthew Schlanger via CnC-List wrote: Hello CnC list, I was wondering if anyone knew exactly what kind and where I can find a replacement for my forward hatch on a 1983 C&C 35 mkIII. I am hoping I can just get a new hatch and use the existing frame, though I assume it comes with a new frame as well just in case. I measured the outer dimensions of the flanges on the frame at 20 7/8” square, the outer dimensions of the hatch at ~21 13/16 square, and the inner distance between the hinges on the hatch at 14 1/16”. I thought this would use a Lewmar replacement but the dimensions don’t seem to match. Thanks in advance. This list is great, I wish I had more time to read it. Matthew Schlanger The Office 1983 C&C 35 mkIII Nyack NY _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray