On Sunday, July 14, 2002, at 07:21 pm, Darren wrote:
> I would like to try the board from a LC in a Classic using the original > 9" monochrome display. Knowing very little about how monitors work I > dont know if this is a stupid idea doomed to failure before it starts > due to a hardware limitation of the original monitor. (A simple yes will > do.) > 2 quick comments - i) the LC is too slow, IMHO, to make it worthwhile. ii) interfacing a Classic CRT to a non-compact logic board requires an 'analogue' board of some sort - eg that from the 12" monitor, as in my PMGSP. You might be able to use the analogue board of the Classic, but you'd only get a 1-bit display, AFAIK. Stuart -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
