Re: 500 MEG HARDDRIVE

[Michael]

I copied that to a boot floppy and put the 500 meg back in the classicII 
and it is initializing right now.  Actually I had to 'hack' the file 
myself because I am on a pc and couldn't get the file to copy into 
Basilisk II to get it on a floppy. but I got it working...

Thanks, now that this works, I have to make the 19 disk set for OS 7.5.3 
and copy it all to the drive, and then install it. I have no cd rom 
drive to use... :(

Thanks,
-Mike-
[EMAIL PROTECTED] wrote:

I have a Fujitsu 512 meg 50pin SCSI harddrive that I would like to use
in my Classic II.  When I hook it up the system boots to the ploppy
drive and when I run HD SC setup to partition and format the drive it
responds saying that there are no suitable SCSI devices connected to the
SCSI port.
Mike
   

Use HD SC setup 7.3.5 (patched) instead. The one you're using won't see
non-Apple ROM hard drives but the patched one will.
<ftp://grijan.cjb.net:21000/macintosh/Software/Utilities/hd_scsetup_735%28patche
d%29.sea.bin>
Gamba
<http://home.earthlink.net/~gamba2>


 



--
Compact Macs is sponsored by <http://lowendmac.com/>.
     Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------