Re: PPC 7200/120 Installation Problems

[J. Frank Cortes]

This is where I am with this as of now. I have used both the 2.2 and the 2.4 kernels with the same results. When I choose the Mac53c94 module it installs properly and finds one SCSI host. It also sees all of the devices on the SCSI bus. but then the Kernel panics. The exact error message I get is
"Kernel Panic Exception in Kernel PC C015ea2c Signal 4"
Any additional help is greatly appreciated.

Thanks

Frank Cortes


At 8/16/2001 02:47 AM, you wrote:

i have tryed working with rc1 yet i am wating for the burnt disk but with beta 1 on our 7200 bootX was the ticket. there was instuctions on the disk. not sure if it is the same for you ?

Sharing, is a strength among the weak,
and a weakness among strong.
from the intro to War Craft



----Original Message Follows----
From: "J. Frank Cortes" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: PPC 7200/120 Installation Problems
Date: Wed, 15 Aug 2001 13:02:15 -0400

I got the screen for loading the modules and I tried several modules
including the MAC53c94 one which caused a Kernle Panic and I had to reboot.
I also tried the Mesh, and the Mace drivers as well.

Frank Cortes

At 8/15/2001 12:12 PM, you wrote:

On Wed, 15 Aug 2001, cjw wrote:

> It should be a 53c94 (or 96, but only one of them is used in PowerMacs
> AFAIK, see kernel config). Some macs of the 7/8/9xxx series use MESH for
> internal fast SCSI and 53c94 for external SCSI.
>
53c94 is included - you were not shown a screen in stage1 where you could
load modules?

Stew Benedict

--
MandrakeSoft    OH/TN, USA      http://perso.mandrakesoft.com/~sbenedict/
PPC Faq:
http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&m=99441208917647&w=

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp