https://qa.mandrakesoft.com/show_bug.cgi?id=1801
------- Additional Comments From [EMAIL PROTECTED] 2003-02-20 22:52 ------- Hi, not shure whether i should create a new bug report, but the symptoms are exactly the same. MB epox 8k5a3+ via8235 onboard HPT374, 4 ibm deskstart 120GXP 80GB on each HPT chanel as master ( used as a udma not raid controler ) via master 1 DVD LG DRD-8120B via master 2 CDRW LG CED-8080B via slave 2 Iomega ZIP-100 ATAPI all drives are detected( on the console log) but the installer do not want to find a cdrom containing the instalation i couldn't get bug report : no propt on alt-F2 typing bug -- no efect any hints? svetljo ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: 9.1 RC1 installation fails on an Asus P4B533-E motherboard with the MBFasttrack133 controller. The installer detects that a SCSI interface is in the machine and asks for which module to load. I choose ataraid.o and the installer reports that the module was successfully loaded and the SCSI interface was found. Then it asks if there are any others. No matter what I choose at this point... If I say "No," it will report that there are no devices available to install filesystems. If I say "Yes," it naturally drops me back to the SCSI module selection screen. My hard drive is hooked up to this PDC20276 controller. My CDROMs are hooked up to standard IDE controller apart from the PDC20276. Since this problem existed in 9.0 (in a much much worse way) I was really looking forward to 9.1 solving this!
