https://qa.mandrakesoft.com/show_bug.cgi?id=1801
------- Additional Comments From [EMAIL PROTECTED] 2003-02-24 18:40 ------- just tried cooker from yesterday, the same problem. is it possible that somehow DrakX is checking for a cdrom containing the instalation only on the first 2-4 ide chanels? or may be only devices /hd[a-d] ? because if i try booting with ide=reverse it finds the cdrom and i can perform the instalation at least to a ceirtain point ( where diskdrake stoped responding ) but without "ide=reverse" on consoly everything is detected and DrakX refuse to find cdrom containing the instalation in my case /dev/hd[ik] are cdroms /dev/hda /dev/hdc /dev/hde /dev/hdg are hard disks ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: 9.1 RC1 installation fails on an Asus P4B533-E motherboard with the MBFasttrack133 controller. The installer detects that a SCSI interface is in the machine and asks for which module to load. I choose ataraid.o and the installer reports that the module was successfully loaded and the SCSI interface was found. Then it asks if there are any others. No matter what I choose at this point... If I say "No," it will report that there are no devices available to install filesystems. If I say "Yes," it naturally drops me back to the SCSI module selection screen. My hard drive is hooked up to this PDC20276 controller. My CDROMs are hooked up to standard IDE controller apart from the PDC20276. Since this problem existed in 9.0 (in a much much worse way) I was really looking forward to 9.1 solving this!
