Thanks Warren! When the weather gets a little better, I'll give everything a close and careful inspection. It appears the top cowl has had the hole for the filler neck moved back a little. Is that what you meant?
The old tank repairs appear to have been very well done, and I have had no problems. There is no evidence of anything rubbing now. I guess the main thing is that the tank is not leaking, secure, and there is some clearance between it and the controls. Artie N2666H ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, January 30, 2000 4:02 PM Subject: Re: [COUPERS-TECH] Header tank leaks from rubbing > Artie, A lot of older C's have had the header changed to 6 gal headers. Most > the neck and cap lean forward a little and the cap just comes out of the > rubber grommet. Cause poor installation of the new tank. The filler neck is a > little different. It is more back on the 6 as I recall. The hole in the tank > skin needs the be trimmed to get the tank up where it belongs. Warren H. > > > --------------------------------- > to unsubscribe send mailto:[EMAIL PROTECTED] > > ______________________________________________ > Faster, stronger and able to send millions > of emails in one click: the new Topica site! > http://www.topica.com/t/14 --------------------------------- to unsubscribe send mailto:[EMAIL PROTECTED] ______________________________________________ Faster, stronger and able to send millions of emails in one click: the new Topica site! http://www.topica.com/t/14
<<attachment: winmail.dat>>
