----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 09:16 PM 2/6/02 -0500, Richard Blair wrote: > Soldered the braid into the lugs and attached them across a hinge on > each aileron, rudder >and elevator. Righto. However, if you are going to fabricate your own, consider making them up using silver-solder and one of those handy-dandy little oxy-acetylene torches that some craft shops sell. Resistance is death to ground-straps of any kind, whether they be for your household lighting rods or on the plane. Static electricity is very high-voltage, and as such is susceptible to make ugly noises across any sort of resistance. Greg ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
