God!. I have had my chain yanked by a yank. "Revenge is mine". (Said someone who I cannot recollect)
At 11:26 19/01/00 , you wrote: >Brian. I don't pull legs. I do however yank chains. Consider yours yanked. > >Larry > >Brian Garrett wrote: > >> Larry, are you just pulling our legs or are you serious. Then again I might >> have misread your post. >> >> Are you saying that a prop repitch will effect the accuracy or calibration >> of the tach because if you are I must correct you. The tach purely shows >> crankshaft RPM and has nothing to do with peripheral items including the >> prop. If the tach has a 10% under-read a prop repitch will certainly allow >> the crank to spin at a different RPM but the 10 % under-read of the tach >> will still be there. >> >> In other words tach error can only (and I emphasize ONLY) be corrected by >> shop calibration of the tach. >> >> At 02:03 19/01/00 , you wrote: >> >Wrong! If you repitch, but neglect to inform the tach that you've made a >> change, >> >the tach will now read the correct figure. Jeezze, must I explain >> everything? >> > >> >Larry the Stooge >> > >> >John Cooper wrote: >> > >> >> In a message dated 00-01-16 22:35:44 EST, you write: >> >> >> >> > >> >> > I had a prop shop in Hemet, CA. repitch it to 7148 (combo ) and I picked >> >> up >> >> > nearly 90 RPM so there is almost no difference in tach / digital test >> >> meter >> >> > reading now. >> >> What am I missing here? Did you also replace the tach? Repitching the >> prop >> >> will have no effect on the tach error, it'll just read wrong ata different >> >> RPM. >> >> >> >> Curley >> >> >> >> >> __________________________________________________________________________ __ >> ____ >> >> To unsubscribe from this list please send mail to >> [EMAIL PROTECTED] >> >> >> >> _____________________________________________________________ >> >> Check out the new and improved Topica site! >> >> http://www.topica.com/t/13 >> > >> > >> >_________________________________________________________________________ __ >> _____ >> >To unsubscribe from this list please send mail to >> [EMAIL PROTECTED] >> > >> >_____________________________________________________________ >> >Check out the new and improved Topica site! >> >http://www.topica.com/t/13 >> > >> >> Regards >> >> Brian Garrett >> Melbourne >> Australia >> (613) 9459 1779 >> Sonerai II VH-JGB >> 415C VH-??? >> >> __________________________________________________________________________ __ ____ >> To unsubscribe from this list please send mail to [EMAIL PROTECTED] >> >> _____________________________________________________________ >> Check out the new and improved Topica site! >> http://www.topica.com/t/13 > Regards Brian Garrett Melbourne Australia (613) 9459 1779 Sonerai II VH-JGB 415C VH-??? __________________________________________________________________________ ______ To unsubscribe from this list please send mail to [EMAIL PROTECTED] _____________________________________________________________ Check out the new and improved Topica site! http://www.topica.com/t/13
<<attachment: winmail.dat>>
