Yep, running mint 19.2. I have darktable 2.6.2 running under my standard user account. And I have set up a second user account specifically for running the dev version (if I can ever get it running... Well, I have 2.7.0 working, but it is way out of date now. No filmic rgb, no tone equalizer, old interface, etc).
Cheers, Bruce Williams. ---------- Forwarded message --------- From: Druuna <[email protected]> Date: Tue., 8 Oct. 2019, 21:42 Subject: Re: Fwd: Fwd: [darktable-user] Struggling here... To: Bruce Williams <[email protected]> Cc: darktable-user <[email protected]> Hi Bruce, Quick answer, I'm in a bit of a rush. To my knowledge the "git tag" command only shows basic version info. On my side it also shows what you are seeing: git tag 0.3 0.4 accels-premerge post0.9 release-0.5 . . release-2.6.2 release-2.7.0 release0.4 So that's nothing to worry about (Atm my development version is 2.7.0+1959~ga6b9b9058). On my machine I have 2 darktable versions: - The stable 2.6.2 one I installed with Debian, which resides in /usr/bin/darktable and is in my PATH setting. - The development version, which can be found in /opt/darktable/XYZ and is not in my PATH. If I run: darktable --version The one available from my PATH is run and I get: this is darktable 2.6.2 . . If I run: /opt/darktable/bin/darktable --version The development version is run and I get: this is darktable 2.7.0+1959~ga6b9b9058 . . Might the same scenario be true for what you are seeing? Which distro are you using (Mint right; if I remember your videos correctly). Have to run, I just thought that this might be the case. Let me know and I'll get back to you. Op Tue, 8 Oct 2019 21:13:21 +1100 Bruce Williams Schreef: > Jacques, > Thanks for the detailed instructions. > Sadly, I still only have 2.7.0. :( > > > this is darktable 2.7.0 > copyright (c) 2009-2018 johannes hanika > [email protected] > > compile options: > bit depth is 64 bit > normal build > SSE2 optimized codepath enabled > OpenMP support enabled > OpenCL support enabled > Lua support disabled > Colord support enabled > gPhoto2 support enabled > GraphicsMagick support enabled > OpenEXR support enabled > > When I do 'git pull', I get a return of 'Already up to date'. > When I do 'git tag', the list doesn't show all the random text after the > version number (eg. +1954~g50ad5ba6c), just 2.7.0 and that's it. > For example.... > > release-2.4.0rc2 > release-2.4.1 > release-2.4.2 > release-2.4.3 > release-2.4.4 > release-2.5.0 > release-2.6.0 > release-2.6.0rc0 > release-2.6.0rc1 > release-2.6.0rc2 > release-2.6.1 > release-2.6.2 > release-2.7.0 > > Not sure what I'm missing. > > Cheers, > Bruce Williams > > > ---------- Forwarded message --------- > From: Druuna <[email protected]> > Date: Mon, Oct 7, 2019 at 11:02 PM > Subject: Re: Fwd: [darktable-user] Struggling here... > To: Druuna <[email protected]> > Cc: Bruce Williams <[email protected]>, darktable-user < > [email protected]> > > > I forgot one step: > > > You also need the rawspeed module: > > > > git submodule init > > git submodule update > > Should be: > > You also need the rawspeed module: > > cd /home/darktable/darktable # <----------- !!! > git submodule init > git submodule update > > Sorry. > > Jacques > > ____________________________________________________________________________ > darktable user mailing list > to unsubscribe send a mail to [email protected] -- The dead stay dead and the living only wait to join them. ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to [email protected]
