This is just a continuation of the other thread.
http://www.mail-archive.com/[email protected]/msg02446.html
Thanks Ivan and Daniel for all your help with UBL
and u-boot.
We are now trying the uboot 1.1.6 and trying the
Nand support. We are using a large Page Nand device ST
Micro (2048 byte pages).
The mtd in uboot1.1.6 seems to store the ECC values
for every 256 byte data. But the davinci HW ECC gives
us 24 bits for every read which is 512 bytes of data.
Does that mean that the Davinci's HW ECC is not
compatible with the way we need to store and
manipulate the correct_data() function in the mtd?
Regards
Suba.
--- Ivan Tonchev <[EMAIL PROTECTED]> wrote:
>
> > My u-boot compilation seems to go well. But
> during
> > ld, there are errors like this:
> >
> > _udivSi3.oS: warning: duplicate section
> > .note.gnu.arm.ident has different contents.
> >
> > And the map file is created, but no .bin or
> .srec.
> > Any ideas?
> >
>
> Which version of u-boot are you compiling and with
> what toolchain?
>
____________________________________________________________________________________
Moody friends. Drama queens. Your life? Nope! - their life, your story. Play
Sims Stories at Yahoo! Games.
http://sims.yahoo.com/
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
