RE: [Declude.JunkMail] Declude crashing and taking up 99% CPU

[R. Scott Perry]

>My server decided to behave for nearly a week, then last night one
>locked.  Running a log level of high this is the only entries the offending
>process made:
>
>09/12/2001 20:03:36 Q05e6040 000276 Start
>09/12/2001 20:03:36 Q05e6040 000276 Locking d:\spool\Q05e6040.SMD.
>09/12/2001 20:03:36 Q05e6040 000276 d:\spool\Q05e6040.SMD locked.

This actually gives us a lot of information to work with.  Not as much as 
it could, but enough to narrow down the problem to a limited section of 
code.  Am I right that you are using the console, that appears as a window 
on the server?

>-------- Begin File ---------

I tried sending that file through a test server here, and it went through 
fine.  It sounds like there may be some other factors involved.

>Received: from server1.sesc.local [213.48.47.108] by argolink.net with ESMTP
>   (SMTPD32-6.06) id A5E61C340040; Wed, 12 Sep 2001 20:03:34 -0500
...
>To: <ombev>

The To: line does stick out, since there is no "@" in it.  One thing that 
would be useful would be to check the \IMail\spool\sys0912.txt file at 
20:03 and see what the "HELO" line, "MAIL FROM:" and "RCPT TO:" lines are 
for this E-mail.  That might be a clue.
                                                        -Scott

---

This E-mail came from the Declude.JunkMail mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.JunkMail".  You can E-mail
[EMAIL PROTECTED] for assistance.  You can visit our web
site at http://www.declude.com .