>> there's a new config option in 1.28 that is designed to help with this <<
See, I vaguely remember that someone made a change there. >> If you have a line "SWITCHRECIP ON" in the global.cfg file, Declude will use the actual recipient instead of the intended recipient. << It seems the default is ON. Because in MY case it's now using the ACTUAL recipient - and I do NOT have SWITCHREP defined at all. If this switch were to work as you describe (ON = ACTUAL, OFF/Null = INTENDED), then it should be using the intended recipient - and it does NOT. What do we do next? Best Regards Andy Schmidt Phone: +1 201 934-3414 x20 (Business) Fax: +1 201 934-9206 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of R. Scott Perry Sent: Tuesday, November 06, 2001 03:24 PM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] 1.28 - Per Domain Configs fail - URGENT >Of course, you realize that it would be more flexible if we could customize >on a PER DOMAIN basis (the intended recipient), rather than on a per virtual >host basis (the actual recipient)? Yes -- and there's a new config option in 1.28 that is designed to help with this. If you have a line "SWITCHRECIP ON" in the global.cfg file, Declude will use the actual recipient instead of the intended recipient. This may change it, however, so that you will see the actual recipient in the variables rather than the intended recipient. -Scott --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". You can E-mail [EMAIL PROTECTED] for assistance. You can visit our web site at http://www.declude.com . --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". You can E-mail [EMAIL PROTECTED] for assistance. You can visit our web site at http://www.declude.com .
