Hi Frederick: Here is what we do:
# Version>= 1.27i28: Skip the test if weight is reached SKIPIFWEIGHT 70 # Version>= 1.27i28: Exit the test if weight is reached MAXWEIGHT 60 REMOTEIP 0 STARTSWITH 157.151.5 REMOTEIP 0 STARTSWITH 193.216.245.227 REMOTEIP 0 STARTSWITH 194.143.183.53 You have to be using Declude 1.27i27 or 28 (I don't remember) or higher.. Simply add them to the top of your filter files and it will do what they say they do.. Upon start of the filter if the total weight prior to entering the filter is 70 then the filter will not run and if during the run of the filter the weight associated with the filter reaches 60 then the filter exits. So if you have a weight of 50 going into the filter you can exit the filter with no more than 110 as weight. OR If you are running the filter and you are already at a weight of 70 then the filter will never run and you will exit with 70. Recommendation: Make sure you put all your weights that have negative weight prior to the ones with positive weight. That is what we do - all of our negative weights are on top of the global.cfg and we have structured our filters such that the bigger filters are the last to execute so hopefully if the weight is large enough prior to getting to them they will not run. Looking at our log files it is incredible how many of the filters are not even running anymore but they are there just in case... Hope that answers your question.. Regards, Kami -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frederick Samarelli Sent: Friday, November 28, 2003 11:20 PM To: [EMAIL PROTECTED] Subject: [Declude.JunkMail] SKIPIFWEIGHT and MAXWEIGHT Does any one have more information on these SKIPIFWEIGHT and MAXWEIGHT Thanks. Fred --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
