Hi Roland I'm away from my machine I use to build b2g but I will email the exact steps I use to build later this evening. I basically used the mdn guides to setup the build environment but I used steps found elsewhere on the web to build b2g and I flash it manually in fastboot (versus using flash.sh). I also had to modify a boot.img to get it to boot, again using info from the web. The gentleman that figured out how to modify the boot.img has a download available but it didn't work for me (I believe his boot.img is based on a 1.0 build where as I modified a 1.1 boot.img that I pulled out of the zte official 1.1 update. Again I'll write more later when I can.
-foo -----Original Message----- From: "Roland Lindner" <[email protected]> Sent: 4/21/2014 3:14 PM To: "[email protected]" <[email protected]> Subject: Re: [b2g] ZTE Open - supported or not? Thanks Joseph, i have seen that you can use 1.3 - but it seems it's not possible to upgrade to 1.4 or 1.5. i have tried to build 1.3 myself on a virtual ubuntu machine which does nothing else and is configured as described on MDN. but i can't actually build anything - the build fails for 1.2, 1.3 and everything else. ( i did not try 1.1 since that is obviously available directly from ZTE) i have access to my phone, the /system gets pulled and then there are many many errors and finally - build failed. i must be missing something, it cannot be that hard.... _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
_______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
