Hello, By applying this, I was able to successfully execute the I2C scanner.
Thank you! On Wed, Feb 12, 2025, 9:16 PM Alan C. Assis <acas...@gmail.com> wrote: > Hi Yashvi, > > You can enable the debug symbols to inspect where your code is crashing > (the positions at LR: 0800d3b7 PC: 0800dcbe) > > Enable it in your menuconfig: > Build Setup ---> Debug Options ---> [*] Generate Debug Symbols > > Then flash the new image and run: > > arm-none-eabi-addr2line -e nuttx 0800d3b7 > arm-none-eabi-addr2line -e nuttx 0800dcbe > > Probably these LR and PC values will change for your new image, then modify > the commands above to use the new values. > > BR, > > Alan > > On Wed, Feb 12, 2025 at 12:31 PM 175 yashvi shah <yashvee...@gmail.com> > wrote: > > > Yes > > > > Details of error > > > > dump_assert_info: Current Version: NuttX 12.8.0 1828d09b2a-dirty Feb 12 > > 2025 0m > > dump_assert_info: Assertion failed panic: at file: :0 task: <noname> > > process: K5 > > up_dump_register: R0: 4000541c R1: 00000000 R2: 00000048 R3: > > 00000001 > > up_dump_register: R4: 00000000 R5: 00000000 R6: 00000000 FP: > > 00000000 > > up_dump_register: R8: 00000000 SB: 00000000 SL: 00000000 R11: > > 00000000 > > up_dump_register: IP: 00000000 SP: 380008b0 LR: 0800d3b7 PC: > > 0800dcbe > > up_dump_register: xPSR: 21000000 BASEPRI: 00000000 CONTROL: > > 00000000 > > up_dump_register: EXC_RETURN: > > ffffffe9 > > dump_stackinfo: User > > Stack: > > dump_stackinfo: base: > > 0x38000208 > > dump_stackinfo: size: > > 00002008 > > dump_stackinfo: sp: > > 0x380008b0 > > stack_dump: 0x38000890: 00000000 00000000 00000000 00000000 00000000 > > 00000000 0d > > stack_dump: 0x380008b0: 00000000 38000a48 00000001 38000a48 24001e3c > > 00000000 00 > > stack_dump: 0x380008d0: 00000000 00000000 240000f4 38000a48 00000000 > > 00000000 39 > > stack_dump: 0x380008f0: 3800fff8 38000a48 00000001 38000a48 240000f4 > > 00000000 0f > > stack_dump: 0x38000910: 00000009 38000a58 0800bb13 38000a58 00000000 > > 08009b71 38 > > stack_dump: 0x38000930: 38000a48 38000a58 0801ec48 08002075 00000001 > > 00000000 7f > > stack_dump: 0x38000950: 00000030 380009e8 00000000 38000a48 00000000 > > 08001e9d 00 > > stack_dump: 0x38000970: 00000000 08001e25 00000000 080023b1 00000000 > > 00000000 00 > > stack_dump: 0x38000990: 08003ddc 01000000 00000000 00000000 00000000 > > 00000000 01 > > stack_dump: 0x380009b0: 380001f0 00000001 00000000 08003e33 00000000 > > 380001f0 00 > > stack_dump: 0x380009d0: 00000001 00000001 00000000 00000000 00000000 > > 00000000 00 > > dump_tasks: PID GROUP PRI POLICY TYPE NPX STATE EVENT > > SIGMASK D > > dump_task: 0 0 0 FIFO Kthread - Ready > > 0000000000> > > dump_task: 1 0 240 RR Kthread - Running > > 0000000000> > > > > On Wed, Feb 12, 2025, 7:12 PM Alan C. Assis <acas...@gmail.com> wrote: > > > > > Hi Yashvi, > > > > > > Please send the dump of this crash, using it you can find where the > code > > is > > > crashing. > > > > > > BR, > > > > > > Alan > > > > > > On Wed, Feb 12, 2025 at 2:51 AM 175 yashvi shah <yashvee...@gmail.com> > > > wrote: > > > > > > > Hello, > > > > > > > > I am attempting to retrieve data from a BMI270 sensor on an STM32H7 > > > board. > > > > > > > > However, when using the I2C scanner, a peculiar error is generated in > > > > Minicom. > > > > > > > > The error is dump_assert_info : current version: nuttx 12.8.0 > > > > > > > > > > > > Furthermore, when trying to configure (make menuconfig-> application > > > > configuration-> example).there no option of bmi270 > > > > > > > > Could you please assist me in resolving this issue? > > > > > > > > Thank you. > > > > > > > > > >
