Hi, Le Fri, 5 Nov 2010 19:40:14 +0800, Adam Wang <[email protected]> a écrit : > The updated design files are here: > http://downloads.qi-hardware.com/hardware/milkymist_one/pcb/rc2/110510/rc2_design.tar.bz2
> Yes, I was with carelessness. > From 110310, we deleted MilkymistOne.SchLib & .PcbLib, in the > schematic editor, "Design->Make Schematic Library"; in the PCB > editor, "Design->Make PCB Library"; > Recompiled files are under "MilkymistOne" folder. And re-linked > 6N138S's library. I still can't recompile the library. Attached are the error messages that I get. Also: * the IntLib files references a non-existing MilkymistOne1.PcbLib file * there are two copies of the PcbLib file, I took the one in the "MilkymistOne". Is that the right one? > Yes, I've checked DRC myself too. That's my fault without up to date > and made same DRC rules as RC1. You may already know they are > acceptable. After verifying RC1 design files, in 110510, it has been > given the same rules as RC1. Check out here. > http://en.qi-hardware.com/wiki/Milkymist_One_RC2_Layout_History#20101102 OK, better now :) > After co-working with experienced layout guys here, they do not use > this mechanism to complete the layout, because it would allow them to > spend more time to process because the AD software too stringent > internal testing mechanisms derive the excess of the rectification > work. Yeah, AD is a bit messy, and it's just too easy to create PCB/schematics discrepancies or library discrepancies. Still, by ignoring the warnings or allowing such discrepancies it increases the risk that errors may slip through and it makes the design confusing. > Overall, okay; but please comment on 110510 version. > Next to generate gerbers/AI files. If you are absolutely certain about the footprints and that the synchronization issues won't cause real problems, go ahead. I would prefer a clean design in AD, but I'm not sure if we can get that in time... S.
Class Document Source Message Time Date No. [Warning] MilkymistOne.SCHLIB Compiler Cap: Could not find '0805' 21:45:22 05/11/2010 1 [Warning] MilkymistOne.SCHLIB Compiler Cap Pol1: Could not find '0402POL' 21:45:22 05/11/2010 2 [Warning] MilkymistOne.SCHLIB Compiler Cap Pol1: Could not find '1206POL' 21:45:22 05/11/2010 3 [Error] MilkymistOne.SCHLIB Compiler Diode: Could not find port 'A' on model '0603POL' for pin 'A' 21:45:22 05/11/2010 4 [Error] MilkymistOne.SCHLIB Compiler Diode: Could not find port 'K' on model '0603POL' for pin 'K' 21:45:22 05/11/2010 5 [Error] MilkymistOne.SCHLIB Compiler Diode: Could not find port 'A' on model '0805POL' for pin 'A' 21:45:22 05/11/2010 6 [Error] MilkymistOne.SCHLIB Compiler Diode: Could not find port 'K' on model '0805POL' for pin 'K' 21:45:22 05/11/2010 7 [Warning] MilkymistOne.SCHLIB Compiler Diode: Could not find '1206POL' 21:45:22 05/11/2010 8 [Warning] MilkymistOne.SCHLIB Compiler Diode: Could not find 'AD1580' 21:45:22 05/11/2010 9 [Warning] MilkymistOne.SCHLIB Compiler Inductor: Could not find '0805' 21:45:23 05/11/2010 10 [Warning] MilkymistOne.SCHLIB Compiler LED2: Could not find '0402POL' 21:45:23 05/11/2010 11 [Warning] MilkymistOne.SCHLIB Compiler LED2: Could not find '1206POL' 21:45:23 05/11/2010 12 [Warning] MilkymistOne.SCHLIB Compiler Res1: Could not find '0805' 21:45:23 05/11/2010 13
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Twitter: www.twitter.com/milkymistvj
