Hello Group,
I have been testing a multiple node mesh with ath5k and Authsae,
We are working our way up to 15 units in a mesh to do some stress testing.
We have run into a snag and not sure what to look at from here.
We have latest Kernel 3.6 with latest Compat-wireless build
We have the latest iw and authsae from GIT
Everything comes up and on-line with out any problem initially.
The issue we see is that some units, (Not all of them and not all the same
units) will show
NL80211_CMD_NEW_PEER_CANDIDATE(1349901686.331237)
new unauthed sta (seq num=1349901526)
NL80211_CMD_NEW_STATION (1349901686.331237)
NL80211_CMD_NEW_PEER_CANDIDATE(1349901701.695901)
new unauthed sta (seq num=1349901527)
NL80211_CMD_NEW_STATION (1349901701.696901)
NL80211_CMD_NEW_PEER_CANDIDATE(1349901717.61565)
new unauthed sta (seq num=1349901528)
NL80211_CMD_NEW_STATION (1349901717.61565)
NL80211_CMD_NEW_PEER_CANDIDATE(1349901732.426229)
new unauthed sta (seq num=1349901529)
NL80211_CMD_NEW_STATION (1349901732.426229)
NL80211_CMD_NEW_PEER_CANDIDATE(1349901747.790893)
new unauthed sta (seq num=1349901530)
NL80211_CMD_NEW_STATION (1349901747.791893)
NL80211_CMD_NEW_PEER_CANDIDATE(1349901762.131713)
new unauthed sta (seq num=1349901531)
NL80211_CMD_NEW_STATION (1349901762.131713)
If I do a iw dev mesh2 station dump I see
iw dev mesh2 station dump
Station 00:15:6d:94:4f:76 (on mesh2)
inactive time: 545 ms
rx bytes: 800
rx packets: 16
tx bytes: 0
tx packets: 0
tx retries: 0
tx failed: 0
signal: -30 dBm
signal avg: -30 dBm
Toffset: 10133145424 us
tx bitrate: 1.0 MBit/s
mesh llid: 0
mesh plid: 0
mesh plink: LISTEN ------ LISTEN STATE COULD BE ATTRIBUTED BY NO
MFP?
authorized: no
authenticated: no
preamble: long
WMM/WME: yes
MFP: no *------- NOTICE NO MFP*
TDLS peer: no
Station 00:15:6d:94:5a:39 (on mesh2)
inactive time: 17702 ms
rx bytes: 1539
rx packets: 23
tx bytes: 1090
tx packets: 7
tx retries: 6
tx failed: 1
signal: -62 dBm
signal avg: -61 dBm
tx bitrate: 1.0 MBit/s
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
Station 00:15:6d:94:6e:6b (on mesh2)
inactive time: 721 ms
rx bytes: 544314
rx packets: 6054
tx bytes: 254624
tx packets: 883
tx retries: 58
tx failed: 0
signal: -46 dBm
signal avg: -46 dBm
Toffset: 490313930 us
tx bitrate: 54.0 MBit/s
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
If I reboot the routers the same thing happens.
I have tried with and without nohwencrypt=1
I have also applied the patch
http://www.spinics.net/lists/linux-wireless/msg95993.html which was missing
for the latest build
any help on what to look for would be appreciated.
Fred
_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
