On Fri, Oct 12, 2012 at 10:01 AM, fred veldini <[email protected]> wrote: > Hello, > > I tried to change the mcast-rates from 12 to 6 and also to 1 on all 6 > routers with no luck. > > I did notice something that Thomas asked earlier > >>>>> Just to confirm: all neighbors toward the router in LISTEN show it as >>>>> LISTEN, right? > > My reply was not correct. after trying out the mcast changes i compared the > iw dev station dumps on all the routers. The units that are not able to > communicate have LISTEN states. But the rest have ESTAB states. > > Example: These 2 routers are trying to communicate with each other > > Station 00:15:6d:65:6e:6b (on mesh2) > inactive time: 339 ms > rx bytes: 857596821 > rx packets: 7917741 > tx bytes: 1598706407 > tx packets: 14961965 > tx retries: 1335238 > tx failed: 0 > signal: -50 dBm > signal avg: -49 dBm > > tx bitrate: 54.0 MBit/s > mesh llid: 0 > mesh plid: 0 > mesh plink: ESTAB > authorized: yes > authenticated: yes > preamble: long > WMM/WME: yes > MFP: yes > TDLS peer: no > > ---- > Station 00:15:6d:65:4f:76 (on mesh2) > inactive time: 18 ms > rx bytes: 900 > rx packets: 18 > > tx bytes: 0 > tx packets: 0 > tx retries: 0 > tx failed: 0 > signal: -49 dBm > signal avg: -48 dBm > Toffset: -33792764 us > > tx bitrate: 1.0 MBit/s > mesh llid: 0 > mesh plid: 0 > mesh plink: LISTEN > authorized: no > authenticated: no > preamble: long > WMM/WME: yes > MFP: no > TDLS peer: no > > Hope that helps
Sorry it's still not really clear: everyone else has LISTEN towards 00:15:6d:65:4f:76, or 00:15:6d:65:4f:76 can't communicate with everyone else? Can you please post a full authsae debug output from on of the routers showing LISTEN towards a peer and the ath5k warning? Please mention which mac address is in LISTEN as well Thanks, Thomas _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
