In putting together the floorplan for Gen0.5 I realized I didn't have some important measurements, I would appreciate it if someone that actually has a wandboard could measure these and let me know the values.
First is the spacing between the module board and the carrier board. This is the "airgap" between them. Do not include any parts, just the distance from board to board. Second is the distance from the module mounting holes to the alignment pins on the connector. The connector the module plugs into has two alignment pins the go into holes on the carrier board, one on each side of the connector. One is larger than the other. You can easily see these as holes on the back side of the carrier board. I would like the distance from the center of the alignment hole to the center of the closest module mounting hole. (this is the "X" distance, not the diagonal distance). Just one measurement is fine, but let me know whether it was from the smaller or larger alignment pin. Thanks, John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
