Redrum wrote: > I read through this thread, and thought I would offer a thought. I ran > lms only (no player) on pCP with a USB HHD library. I initially moved > the LMS cache and prefs to the USB HDD. We have frequent power failures. > Everytime (I thought) I had to do a rebuild, unintally/reinstall LMS, > etc, but what was really happening is the pcp would come back up and not > be able to find the HDD to properly start/run (?) LMS. I finally > streamlined my thrashing about to unmounting, then remount the HDD and > things would be fine. > > I then moved the LMS Prefs and Cache back to the SD, and no more > remounting. When power comes back up I still have to do a > shutdown/restart to get the time issue resolved but... > > Further Paul- suggested I use a 3rd partition for LMS data (in case of > corruption, the pcP partition is not affected), and that is what I do. > > So, I guess the reason for my post (after all that) - are you sure you > have to rebuild, or do you have a situation like mine? Where is your > caches/prefs? > > Jim
thanks for your though.. in my case, after power failure I cannot find the pi on the network anymore. so it does not start. I am really not sure what is happening indeed. not quite sure either to put on the cache, being a bit of a newbie ..well not really went deep into picoreplayer and all its possibilities...using it really only for the server for my logitech touch. will try to look more deeper into it cheers ------------------------------------------------------------------------ jouteur's Profile: http://forums.slimdevices.com/member.php?userid=67128 View this thread: http://forums.slimdevices.com/showthread.php?t=113324 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
