cparker Wrote: > See attached picture, I mounted the SB3 on the wall at the weekend > whilst the wife was decorating the Christmas tree :) > > Took about 30-45mins. I printed out the template, cut out the dark > area and then traced this on to the wall. Then put masking tape around > the edges to protect the wall, and then using a Stanley knife and > careful patience, cut the hole. Finishing with a Rasp. > > SB3 slotted in beautifully, I didnt in the end use anything behind it > to hold it in place, the wall is plaster and lathes, and the lathes > held it perfectly in place, cable tied all the leads together and then > up into the attic space. > > A DIY job that worked out very nicely and no nasty surprises for once! > > For reference this is my complete kit list; > > Ceiling speaker - £36.37 > http://www.impactaudio.co.uk/product.asp?ref=550 > > No experience with ceiling speakers so nothing to compare against, but > this works fine and handles deep bass ok without distortion. > Note I dont turn it up extremely loud, its the bathroom not the front > room! ;) > > Acoustic Solutions SP101 Amplifier - £60 from Argos > http://www.acousticsolutions.net/product.asp?ID=92 > > Cheapest amp I could find, and is ok, does the job. Has 6 phono inputs > available, I have it balanced at 23.75db. > > Speaker Cable 42 Strand x 25Metres - £15 > http://www.aqsound.com/store/en/view_product/34/94/ > > > SB3 Expensive and stung by Customs and Excise for tax :( That looks really good! Well done!
-- abdomen ------------------------------------------------------------------------ abdomen's Profile: http://forums.slimdevices.com/member.php?userid=1205 View this thread: http://forums.slimdevices.com/showthread.php?t=17420 _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
