Cheryl, the slide switch locks the camera assembly so you will slide
it away from the position it was in when you unpacked it.
If the scanner is sitting so the glass-side is up, in its normal
operating position, the switch should be to the left. There is an
installer script on the cd, but I know there is an installer app
which is tough to use. I'd have to dig up my disc and recall how I
installed it, sorry my memory is failing me these days.grin
I recall you have to install the toolbox program and then the drivers
in that order acording to the info I gto from the web site. I
honestly do not recall what the buttons are on the front, I'll have
to ask my wife, but the one third over from the left is the one Greg
was talking about that creates/dumps the scanned image into a pdf file.
hth
Scott
[EMAIL PROTECTED]
On Sep 28, 2006, at 6:04 PM, Cheryl Homiak wrote:
In addition to my previous questions, I just found a slide switch
with two positions on the bottom of the scanner; didn't notice them
before because there was tape across it. Is this a power switch? If
so, which way is on and can you hear anything that tells you if it
is on? I do have it plugged in to my usb hub.
--
Cheryl
"Where your treasure is,
there will your heart be also".
