On Friday, April 04, 2014 03:55:47 Andrew Buczko wrote: > Torrie, That is not a "massive" lathe > > and for you to suggest getting rid of the pantograph and the lathe is an > insult.
If you're not going to contribute to discussion, please don't post. > > Also may I remind you that we are working on donating our "Extra" tools to > Canhax. > > I agree that we need to do something with the extra table saw, band saws > and the 30 or so circular saws. If Canhax is not ready for them then we > could sell them off. > > Andy > > On Thu, Apr 3, 2014 at 11:13 AM, Torrie Fischer <[email protected]>wrote: > > I'm alright with releasing some grant money to buy a panel saw kit. I can > > see > > this being very useful. > > > > Can we possibly consense on buying this this Tuesday: > > > > http://panelsawsrus.com/products/ > > > > All it is is the kit for the frame. Once that is assembled, we can design > > the > > actual panel saw to not take up as much space, perhaps a collapsible one. > > > > If we still have open concerns about the floor space it uses, I'd also > > like to > > mention that we have *four* bandsaws. Four. And a pantograph. And a > > massive > > lathe. > > > > Certainly we can get rid of some of those things and clean up the machine > > shop > > by a lot. > > > > For reference, here is the footprint of the kit's suggested design: > > > > http://panelsawsrus.com/gallery/psru-youtube-image/ > > > > Looks pretty skinny, probably as much as our current plywood rack. > > > > On Tuesday, April 01, 2014 21:25:42 a l wrote: > > > Before I had to leave the meeting early there was discussion about how > > > to > > > retrofit the machine shop to limit dust &c. In that discussion the topic > > > > of > > > > > plywood/large format wood handling came up and a panel saw like what > > > > lumber > > > > > yards have was suggested. New/Used ones apparently cost thousands of > > > dollars so I sought out a DIY solution. > > > I've found a few kits that come in varying degrees of fully assembled > > > > with > > > > > prices between ~$300-$1000. There are also a few designs for sale from > > > backissues of woodworking magazines($10/issue). Given enough time > > > staring > > > at the ones at the home improvement store and pictures online we could > > > probably make our own without buying plans. Or should we save our time > > > > and > > > > > just buy a kit? > > > At any rate I think it's a viable solution. > > > > > > http://panelsawsrus.com/ > > > http://www.ebay.com/itm/DIY-Sliding-Panel-Saw-Hardware-Kit-/281191079778 > > > > http://www.widgetworksunlimited.com/Panel_Saw_DIY_Frame_Kit_p/ww-panel_saw > > -d> > > > iy.htm > > > > http://www.woodcraft.com/Product/2082569/33113/Safety-Speed-Cut-Panel-Pro-> > > > 2 > > > > > -Saw-Model-PRO2K.aspx http://plansnow.com/dn3099.html > > > > http://www.finewoodworking.com/workshop/tip/build-your-own-panel-saw.aspx > > > > > http://www.rockler.com/woodworking/Panel-Saw-Kit > > > > > > If someone is vehemently against spending the cash and spare circular > > > saw > > > on one we could also situate the table saw near the garage door-side of > > > > the > > > > > shop and just open the planned( they are planned aren't they?) double > > > doors and put an outfeed table in the hallway when we need to make big > > > cuts. > > > > > > happy hacking! > > > Andrew L > > > > _______________________________________________ > > Discuss mailing list > > [email protected] > > https://synhak.org/mailman/listinfo/discuss
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Discuss mailing list [email protected] https://synhak.org/mailman/listinfo/discuss
