Sorry Scott, I don't follow..
Are you saying this will download a file that you tweaked and basically
update my PfSense install?
Once I do this the ports I mentioned will be added to the wizard including
the IAX and IAX2 ports?
Thanks for the clarification.
--Todd
----- Original Message -----
From: "Scott Ullrich" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, September 24, 2005 6:31 PM
Subject: Re: [pfSense-discussion] Traffic Shaper
update_file.sh /usr/local/www/wizards/traffic_shaper_wizard.xml
Rerun the traffic shaper, pick Asterisk, set the bandwidth to 1.5 megabit.
Then that is added.
Scott
On 9/24/05, Mojo Jojo <[EMAIL PROTECTED]> wrote:
Thanks but what about this part :)
> 1- Is there any reasonably easy way for me to add the IAX (5036) and
> IAX2
> (4569) ports to the prioritization after I run the wizard?
----- Original Message -----
From: "Bill Marquette" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, September 24, 2005 6:14 PM
Subject: Re: [pfSense-discussion] Traffic Shaper
On 9/24/05, Mojo Jojo <[EMAIL PROTECTED]> wrote:
> > Also, I assume the wizard only prioritizes the SIP port? Does it
> > prioritize
> > any other ports like the IAX ports, RTP and so on?
> >>
> >>The asterisk setting prioritizes
> >>UDP 5060-5069
> >>and
> >>UDP 10000-17226 (no idea why - SIP maybe?)
>
> This may help:
> http://www.voip-info.org/tiki-index.php?page=Asterisk%20firewall%20rules
>
> UDP 10000-17226 is for SIP RTP, I have no idea what RTP is but is has to
> do
> with the fact that SIP and "Non SIP Aware Firewalls" do not get along
> very
> well. Basically things happen with SIP where you can never guess which
> of
> the ports within this range it will use at any one time, so... The only
> choice if you need SIP is to leave the whole range open, stinks but it's
> the
> only solution from what I understand.
>
> I have hear some buzz about "SIP aware" firewalls which deal with SIP in
> some other way.
>
> Anyhow, from what I understand it's not 10000-17226 that it uses, it's
> 10000-20000 but I could be wrong.
>
> Questions:
>
> 1- Is there any reasonably easy way for me to add the IAX (5036) and
> IAX2
> (4569) ports to the prioritization after I run the wizard?
>
> 2- Can you possibly ad these ports to the wizard so they will just work
> when
> you select the Asterisk option?
Committed. It'll be in the next release (after 0.85.2 which just
released)
