Hey
You can find new one…
take a look at http://www.dproducts.be/Drake_Museum/7_service_kit.htm
73’s
JM
De :
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Bob W7AVK
Envoyé : mardi 16 mars
2004 14:24
À : Drakelist
Objet : Re: [drakelist] TR-7
Board Extraction Tool
To
help with the build drawing, here is a photo.
73
Bob W7AVK
![]()
Joe Mann wrote:
Paul, I made mine from what
looks like #13 Copperclad steel wire. Total length = 4.5 in. There
are 4 bends, all right angled. /-------------------\ <------->
0 |
| |
| side | (front view) |
1/2 in. | view |
| |
| 0
0 <--- ---> ----/ <--
2 3/4 in ------->
--> 3/8 <-- /-------------------\<--- |
| | | (top view)
| 3/8 in |
| |
<--- Match the 2 3/4 in. dimension with the actual hole spacing of the
boards. The wire really needs to be stiff, maybe from a heavy duty coat
hanger. If you can bend it with a pliers, vice grip, etc., it's not heavy
enough. Use a vise and a hammer. 8-) Someone else may have a better
suggestion.Joe, K9HDE PS My experience is that rocking the board
back and forth (left/right) works better that trying to pull the board directly
(up) out of the TR-7.
|
<<image001.jpg>>
