|
Read further down on your link, Bob's kit is
FANTASTIC, but does not include the puller. Too easy to fabricate one
yourself. I agree also that "rocking" the boards back and forth is the
best method, plus it "cleans" the contacts a bit, hi.
73 all,
Don, WB5HAK
----- Original Message -----
Sent: Tuesday, March 16, 2004 7:46
AM
Subject: RE: [drakelist] TR-7 Board
Extraction Tool
Hey
You can find new one�
take a look at http://www.dproducts.be/Drake_Museum/7_service_kit.htm
73�s
JM
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Bob W7AVK
Envoy� : mardi 16 mars 2004
14:24
� :
Drakelist
Objet : Re:
[drakelist] TR-7 Board Extraction Tool
To help with the build drawing, here is a photo.
73 Bob W7AVK
![]()
Joe Mann wrote:
Paul, I made mine from
what looks like #13 Copperclad steel wire. Total length = 4.5
in. There are 4 bends, all right angled.
/-------------------\ <------->
0
|
|
|
| side | (front view)
| 1/2
in. | view
|
|
|
|
0
0 <--- ---> ----/
<-- 2 3/4 in
------->
--> 3/8 <-- /-------------------\<---
|
| | | (top
view) | 3/8 in
|
|
|
<--- Match the 2 3/4 in. dimension with the actual hole spacing of
the boards. The wire really needs to be stiff, maybe from a heavy duty
coat hanger. If you can bend it with a pliers, vice grip, etc., it's
not heavy enough. Use a vise and a hammer. 8-) Someone else
may have a better suggestion.Joe, K9HDE PS My experience is that
rocking the board back and forth (left/right) works better that trying to
pull the board directly (up) out of the
TR-7.
|
