I will check and get back to you. In a message dated 3/31/2008 3:34:54 P.M. Eastern Daylight Time, [EMAIL PROTECTED] writes:
Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Have you checked voltages on V7? Is it being cut off in transmit? 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs <www.k4oah.com> [EMAIL PROTECTED] wrote: > I am still working on my TR-4C. I now have the filter problem fixed > and in fact have the correct signal going all the way to the 12BY7 > driver tube. I do not have any signal coming out of the driver to the > finals. The tube is good and I have substituted another with no > change. The voltages all check good on the 12BY7 except for pin 8. It > has the full 250 volts on it so no grid current is flowing there. What > might cause this? Has any one out there run into this problem before > and maybe could tell me where I should look for the problem. As always > any help would be appreciated. Thanks and 73, > Terry > W8NJR > > > > ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ---------------------------------------------------------------------- **************Create a Home Theater Like the Pros. Watch the video on AOL Home. (http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)