I thought it would be something of that nature. I have taken the PTO apart enough to slide the coil form off the slug and at least initially I don't see any cracks or loose segments. However, the diamond-shaped washer at the end of the coil came out easily as if it wasn't glued at all. It was flush with the end of the form, but I see that it could be recessed in the brown sleeve so that it is against the white coil form.
Does the washer/spacer need to be flush, or bedded down against the form? I'm going to supper shortly, so won't get to look at the slug under my microscope until the table is cleared I have pics if needed. I'm going to clean the whole thing with IPA. Steve Wedge, W1ES/4 To be is to do - Socrates To do is to be - Plato Do be do be do. - Sinatra All my computers have my signature with various pearls of wisdom appended thereto. From: Gary Poland Sent: Monday, July 18, 2011 6:10 PM To: Steve Wedge Cc: [email protected] Subject: Re: [Drakelist] R-4A PTO, Act III Steve, The T-4X puts a –30 volts on the INJ line when the XMTR position is selected. That –30 shuts down the R-4A’s premixer V8. In RCVR position the –30 volts is removed, the T-4X’s PTO output is deselected, and the R-4A’s injection is then free to be boss. 73, Gary
<<Emoticon3.gif>>
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
