Hi Steve:
I'm not sure it doesn't matter if the end pc is flush or not but keep it
perpendicular to the core axis. You may just have found the culprit
there. I like Ambroid cement but nearly anything will work as an
adhesive there. A small amount of 5 min epoxy or even some carpenters glue.
Curt
KU8L
Steve Wedge wrote:
I thought it would be something of that nature.
I have taken the PTO apart enough to slide the coil form off the slug
and at least initially I don't see any cracks or loose segments.
However, the diamond-shaped washer at the end of the coil came out
easily as if it wasn't glued at all. It was flush with the end of the
form, but I see that it could be recessed in the brown sleeve so that
it is against the white coil form.
Does the washer/spacer need to be flush, or bedded down against the form?
I'm going to supper shortly, so won't get to look at the slug under my
microscope until the table is cleared Winking smile emoticon
I have pics if needed. I'm going to clean the whole thing with IPA.
Steve Wedge, W1ES/4
To be is to do - Socrates
To do is to be - Plato
Do be do be do. - Sinatra
All my computers have my signature with various pearls of wisdom
appended thereto.
*From:* Gary Poland <mailto:[email protected]>
*Sent:* Monday, July 18, 2011 6:10 PM
*To:* Steve Wedge <mailto:[email protected]>
*Cc:* [email protected] <mailto:[email protected]>
*Subject:* Re: [Drakelist] R-4A PTO, Act III
Steve,
The T-4X puts a –30 volts on the INJ line when the XMTR position is
selected. That –30 shuts down the R-4A’s premixer V8. In RCVR position
the –30 volts is removed, the T-4X’s PTO output is deselected, and the
R-4A’s injection is then free to be boss.
73, Gary
------------------------------------------------------------------------
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
