> I think it was either in the README or somewhere else in the update > notes Brian NJ6N sent out to all about two weeks ago?
I don't see any reason why what the trust server ops posted on the admin group should be any big secret. After all, most of us are in this to learn: Gateway G2 Ver 2.1 Upgrade The "dsipsvd" software changes Data synchronization was improved (This is the primary reason of this "Rev.2.1"release). Possibility of time-out problem occurrence was drastically reduced. The software was modified to detect if the user did not change the default repeater call sign "XXXXXXX" in the configuration text file, and will not allow operation until the user enters a valid call sign for the repeater. Rare instances of memory leaking were fixed. The "dsgwd" software changes If a terminal moved into another repeater area of the same zone, the software overwrites the headers in incoming packets to redirect the data to the correct area repeater even though the updated user data are not yet shared in the entire network. (Jim's comment this helps a LOT for those of us who move between UHF and VHF during a commute!) When dsgwd software detects a terminal movement (changing zones), it immediately updates the Own Database entry of the terminal position. This enables instant position data update and communication link establishment regardless of the synchronization information sent from the Trust Server. Changes in default software setting The PostgreSQL "autovacuum" function has been turned on as the default. Health checking (between TrustServer and each Local GW) interval was adjusted to every 1 hour (it used to be every 5 minutes). 73 -- John
