Cool, I'd be interested in hearing the results. You'll probably need to set
both the duo and the bridge to use Appletalk/MacIP in TCP IP. You'll
probably also want to give the bridge, the Duo, and whatever machine you're
connecting to IPs in the same range (10.0.0.1, 10.0.0.2, etc), and you'll
need a proxy on the main machine. On the duo, you'll probably want to set
the router address to the bridge, and the bridge set the router address to
whatever the main machine's IP is.
This is all theory, I haven't tried it and it's as likely to not work as
work :) My curiosity is getting the better of me again....
Scott Holder
----- Original Message -----
From: "Kris Feldmann" <[EMAIL PROTECTED]>
To: "Duo/2400 List" <[EMAIL PROTECTED]>
Sent: Friday, July 13, 2001 8:08 PM
Subject: [Duo2400] Re: ethernet for duo 2300?
> I downloaded the bridge... I'll try it and see if I can use TCP/IP
> stuff over the bridge.
>
>
> Kris Feldmann
>
> Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
> > Date: Fri, 13 Jul 2001 19:58:21 -0400
> > From: "Scott Holder" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]> (Duo/2400 List)
> > Subject: [Duo2400] Re: ethernet for duo 2300?
> >
> > Do what exactly? :)
> >
> > I just took my LC III (later upgraded to an LC475), added a cheap LC PDS
> > Ethernet card, and then installed the Localtalk bridge available for
free
> > from Apple on it. From there, I plugged the Ethernet into my PC or
PowerMac,
> > and then hooked my duo up to it through the LC's printer port. Then, I
could
> > share files between the PowerMac or PC transparently. I had some limited
> > success with internet stuff, but haven't gone too far with it. I don't
see
> > why it shouldn't work if the TCP/IP on the LC is set to Appletalk/MacIP.
> > I'll have to try it when I get home tonight :)
> >
> > Hope this is at all useful :)
> > Scott Holder
>
>
> ----------
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
>
> To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
> To switch to the DIGEST mode, E-mail to
<[EMAIL PROTECTED]>
> Need help from a real person? Try.
<[EMAIL PROTECTED]>
>
> ----------
> Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
> MPC-100 | <http://www.drbott.com/prod/mpc100.html>
>
> NineWire | If they are cool enough to host this list...
> Digital Solutions | ...you should check them out! http://www.NineWire.com/
>
> Midwest Mac Parts ][ <http://www.midwestmac.com>
> After-market parts for Macs. ][ 888-356-1104 ][
>
> MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
> Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
