The LocalTalk Bridge control panel won't load on the Duo. It
complains that the printer port is in use. It doesn't seem
to understand the Duo's shared Modem/Printer port.
Kris Feldmann
Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
> Date: Fri, 13 Jul 2001 20:16:27 -0400
> From: "Scott Holder" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]> (Duo/2400 List)
> Subject: [Duo2400] Re: ethernet for duo 2300?
>
> Cool, I'd be interested in hearing the results. You'll probably need to set
> both the duo and the bridge to use Appletalk/MacIP in TCP IP. You'll
> probably also want to give the bridge, the Duo, and whatever machine you're
> connecting to IPs in the same range (10.0.0.1, 10.0.0.2, etc), and you'll
> need a proxy on the main machine. On the duo, you'll probably want to set
> the router address to the bridge, and the bridge set the router address to
> whatever the main machine's IP is.
>
> This is all theory, I haven't tried it and it's as likely to not work as
> work :) My curiosity is getting the better of me again....
>
> Scott Holder
> ----- Original Message -----
> From: "Kris Feldmann" <[EMAIL PROTECTED]>
> To: "Duo/2400 List" <[EMAIL PROTECTED]>
> Sent: Friday, July 13, 2001 8:08 PM
> Subject: [Duo2400] Re: ethernet for duo 2300?
>
>
> > I downloaded the bridge... I'll try it and see if I can use TCP/IP
> > stuff over the bridge.
> >
> >
> > Kris Feldmann
> >
> > Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
> > > Date: Fri, 13 Jul 2001 19:58:21 -0400
> > > From: "Scott Holder" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]> (Duo/2400 List)
> > > Subject: [Duo2400] Re: ethernet for duo 2300?
> > >
> > > Do what exactly? :)
> > >
> > > I just took my LC III (later upgraded to an LC475), added a cheap LC PDS
> > > Ethernet card, and then installed the Localtalk bridge available for
> free
> > > from Apple on it. From there, I plugged the Ethernet into my PC or
> PowerMac,
> > > and then hooked my duo up to it through the LC's printer port. Then, I
> could
> > > share files between the PowerMac or PC transparently. I had some limited
> > > success with internet stuff, but haven't gone too far with it. I don't
> see
> > > why it shouldn't work if the TCP/IP on the LC is set to Appletalk/MacIP.
> > > I'll have to try it when I get home tonight :)
> > >
> > > Hope this is at all useful :)
> > > Scott Holder
> >
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
